Wheel & Spinner

The process to convert a classic and vintage wheel into a coffee table involves the following: -

Wheel

  • Remove the tyre, tube and valve from the wheel if fitted
  • Repair the wheel, replacing any damaged, broken or missing spokes
  • Remove the existing finish with chemical dip
  • Bead blast the surface with fine particles
  • Hand prep the wheel surface
  • Apply primer base coat and bake in oven
  • Hand prep the wheel surface again
  • Apply top colour coat and bake in oven

Wheel is completed ready for the table

Spinner

  • Remove the existing finish with chemical dip
  • Hand prep the spinner surface to remove any damage and pitting
  • Apply a base Copper coat, then a Nickel coat and a final Chrome coat

Spinner is completed ready for the use.


The images shown at the top are the before refurbishment and below are the same items that have gone through the refurbishment process and are ready to use.